Herramienta de colocación de retenedores de cemento mecánicos de 6-5/8"
La herramienta mecánica para la colocación de retenedores de cemento es un dispositivo de accionamiento mecánico que se utiliza para instalar y colocar retenedores de cemento en el pozo. Permite colocar, soltar y recuperar el retenedor de cemento mediante acciones mecánicas como la aplicación de peso, la rotación a la derecha y la elevación. Esta herramienta se utiliza ampliamente en operaciones de cementación forzada, aislamiento zonal y reparación de pozos de petróleo y gas.
- Marca: alegría del sol
- SKU: 3
- Envío:
- Política de devolución: <div class="return-policy"><h2>Política de devolución sin riesgo</h2><p> ¿No estás 100% satisfecho? Facilitamos las devoluciones.</p><div class="highlight-box"><h3>
Saber más
Mechanical cement retainer setting tool
Products Information
-------------------------
Products Name: 6-5/8" Mechanical cement retainer setting tool
Size: 6-5/8"
The mechanical setting tool is a device designed for installing cementing packers and drillable bridge plugs.
Due to its built-in latch and sealing assembly, the tool locks into the cementing packer when setting weight is applied and releases when pulled upward or rotated to the right.
Features and Advantages:
Releases upon right-hand rotation combined with upward movement.
Built-in stinger for installing cementing packers.
Locks when setting weight is applied.
Setting is performed by right-hand rotation.
Technical Specifications:
Nominal diameter of production casing: 168.3 mm (6 5/8 in).
Casing weight: 17–32 lb/ft.
Minimum internal diameter of casing: 142.8 mm (5.625 in).
Maximum internal diameter of casing: 154.8 mm (6.094 in).
Outer gauge diameter: 136.5 mm (5.375 in).
Outer diameter (across springs): 213.4 mm (8.401 in).
Total length: 1581.6 mm (62.27 in).
Seal bore diameter: 2 in (50.8 mm).
Stinger internal diameter: 1.25 in (31.75 mm).
Flow area through stinger: 1.23 in².
Maximum working pressure: 5000 psi (34.5 MPa).
Metal material: Steel 4130–4145.
Elastomer: Nitrile, working temperature up to 250°F (120°C).
Top connection: 2-7/8 in EUE BOX (tubing coupling 73 mm).
The mechanical setting tool shall be manufactured in accordance with the requirements of GOST ISO 14310-2014.
The mechanical setting tool shall be manufactured according to the drawing in Appendix No. 1 to this technical specification.
