Outil de pose de ciment mécanique de 6-5/8 po
L'outil de pose mécanique de dispositifs de retenue de ciment est un dispositif à commande mécanique utilisé pour installer et fixer les dispositifs de retenue de ciment dans le puits de forage. Il assure la pose, le desserrage et la récupération du dispositif de retenue de ciment par des actions mécaniques telles que l'application d'un poids, une rotation dans le sens horaire et un levage. Cet outil est largement utilisé lors des opérations de cimentation sous pression, d'isolation de zones et de réparation de puits de pétrole et de gaz.
- Marque: Soleiljoy
- UGS: 3
- Livraison:
- Politique de Retour: <div class="return-policy"><h2>Politique de retour sans risque</h2><p> Pas entièrement satisfait ? Retours faciles.</p><div class="highlight-box"><h3>
En savoir plus
Mechanical cement retainer setting tool
Products Information
-------------------------
Products Name: 6-5/8" Mechanical cement retainer setting tool
Size: 6-5/8"
The mechanical setting tool is a device designed for installing cementing packers and drillable bridge plugs.
Due to its built-in latch and sealing assembly, the tool locks into the cementing packer when setting weight is applied and releases when pulled upward or rotated to the right.
Features and Advantages:
Releases upon right-hand rotation combined with upward movement.
Built-in stinger for installing cementing packers.
Locks when setting weight is applied.
Setting is performed by right-hand rotation.
Technical Specifications:
Nominal diameter of production casing: 168.3 mm (6 5/8 in).
Casing weight: 17–32 lb/ft.
Minimum internal diameter of casing: 142.8 mm (5.625 in).
Maximum internal diameter of casing: 154.8 mm (6.094 in).
Outer gauge diameter: 136.5 mm (5.375 in).
Outer diameter (across springs): 213.4 mm (8.401 in).
Total length: 1581.6 mm (62.27 in).
Seal bore diameter: 2 in (50.8 mm).
Stinger internal diameter: 1.25 in (31.75 mm).
Flow area through stinger: 1.23 in².
Maximum working pressure: 5000 psi (34.5 MPa).
Metal material: Steel 4130–4145.
Elastomer: Nitrile, working temperature up to 250°F (120°C).
Top connection: 2-7/8 in EUE BOX (tubing coupling 73 mm).
The mechanical setting tool shall be manufactured in accordance with the requirements of GOST ISO 14310-2014.
The mechanical setting tool shall be manufactured according to the drawing in Appendix No. 1 to this technical specification.
